How to load 175 lb
1 × 45 + 1 × 15 + 1 × 5 per side
On a 45 lb barbell, 175 lb is one full-size plate plus a 15 and a 5. Both sides take the same plates, so the bar carries 130 lb of them in total.
The maths in four lines
| 1 | Start at the total: 175 lb. |
| 2 | Subtract the bar: 175 − 45 = 130 lb of plates. |
| 3 | Split it between the two sides: 130 ÷ 2 = 65 lb per side. |
| 4 | Build 65 lb from the biggest plate down: 1 × 45 + 1 × 15 + 1 × 5 per side. |
Check it back: 45 + 45 + 15 + 5 + 45 + 15 + 5 = 175 lb.
This is the same greedy loading the plate calculator uses, except that page also knows which plates you actually own and will tell you when a load is not reachable with them.
Other ways to make 65 lb a side
65 lb per side is the number to hit. The biggest-plate-first answer above keeps the sleeve tidy and uses 3 plates a side. If a size is missing from your stack, these are the rest of the combinations the same total allows:
- 2 × 25 + 1 × 15 per side — 3 plates
- 1 × 35 + 2 × 15 per side — 3 plates
- 1 × 35 + 1 × 25 + 1 × 5 per side — 3 plates
Halves matter: a 2.5 lb plate per side is 5 lb on the bar, which is the smallest jump most home gyms can make. Fractional plates exist for exactly this, and they are the cheapest addition to a stack — see the plate buying guide.
Warm-up ramp to 175 lb
Each step is a weight you can actually load: the percentages are rounded to the nearest 5 lb increment, and steps that would sit on top of each other are dropped. Reps are the ladder the warm-up calculator builds.
| Set | Pounds | Reps | Per side |
|---|---|---|---|
| Empty bar | 45 lb | 10 | empty bar |
| 40% of top set | 70 lb | 5 | 1 × 10 + 1 × 2.5 |
| 60% of top set | 105 lb | 5 | 1 × 25 + 1 × 5 |
| 80% of top set | 140 lb | 3 | 1 × 45 + 1 × 2.5 |
| Working set | 175 lb | — | 1 × 45 + 1 × 15 + 1 × 5 |
Set your own top set, bar weight and rep targets in the warm-up calculator, which also handles a bar that is not 45 lb.
175 lb in kg
175 lb is 79.38 kg on the nose, and kg plates come in fixed sizes, so what goes on the bar is the nearest weight you can actually build — which is exactly what the kg/lb converter returns.
| Kg total | Per side | Against 175 lb |
|---|---|---|
| 80 kg | 1 × 25 + 1 × 5 | the closest you can load |
| 77.5 kg | 1 × 25 + 1 × 2.5 + 1 × 1.25 | 1.88 kg below the exact conversion |
This is the trap when a programme switches units mid-block. The barbell weight guide explains why the nearest loadable weight is often not the nearest number, and the loading chart shows both ladders side by side.
What lifters mean by 175 lb
175 lb is 40 lb more than 1 full-size plate per side (135 lb), so it is a milestone weight with an extra 20 lb on each side — the reason odd totals eat your small plates first. People count plates rather than kilos because the bar is loaded symmetrically: naming one side describes both. The convention breaks across units — a 45 lb plate gym and a 45 kg plate gym are doing different maths, which is why the plate-milestone page and the full loading chart exist.
If 175 lb is a working weight rather than a one-rep max, the 1RM calculator works the other way round: from a set you completed to the max it implies, and the percentage chart turns that max back into training loads.
Questions about loading 175 lb
How many plates is 175 lb?
175 lb is 1 × 45 + 1 × 15 + 1 × 5 per side on a 45 lb bar: 45 + 45 + 15 + 5 + 45 + 15 + 5 = 175 lb.
Is 175 lb the weight including the bar?
Yes. Every barbell total quoted in gyms includes the bar. For 175 lb that leaves 130 lb of plates, so (175 − 45) ÷ 2 = 65 lb per side.
What if my bar is not 45 lb?
Same maths, different bar weight: (175 − 35) ÷ 2 = 70 lb per side on a 35 lb bar (common on deadlift and training bars). Set the bar you actually have in the plate calculator and it loads the rest.
What is 175 lb in kg?
175 lb is 79.4 kg exactly. The nearest weights you can actually load in kg are 80 kg (1 × 25 + 1 × 5 per side) and 77.5 kg (1 × 25 + 1 × 2.5 + 1 × 1.25 per side).
Can I load 175 lb without 45s?
Yes. 2 × 25 + 1 × 15 per side; 1 × 35 + 2 × 15 per side also makes 65 lb a side.
What to buy to load this
The loading above assumes a full gym set already exists. Building one, three purchases decide which weights you can reach - the bar, the plates, and the small pairs that make the in-between numbers lift-able. Each link opens an Amazon search, where prices and stock change hourly.
- Olympic plate set in pounds — the 45 lb pairs that carry this weight and everything heavier.
- Fractional plate pair — 2.5 lb a side turns 5 lb jumps into 2.5 lb ones.
- 45 lb Olympic barbell — the bar every number on this page assumes.
What to buy first, and for how much, is a different question: the home gym builder sizes a whole stack against a budget and a floor area, and the plate, barbell and rack guides say what to check before paying.
As an Amazon Associate, IronMath earns from qualifying purchases. Amazon links on this page are advertising links; we may earn a commission, at no extra cost to you. Recommendations are independent of that.