How to load 115 lb
1 × 35 per side
On a 45 lb barbell, 115 lb is a 35. Both sides take the same plates, so the bar carries 70 lb of them in total.
The maths in four lines
| 1 | Start at the total: 115 lb. |
| 2 | Subtract the bar: 115 − 45 = 70 lb of plates. |
| 3 | Split it between the two sides: 70 ÷ 2 = 35 lb per side. |
| 4 | Build 35 lb from the biggest plate down: 1 × 35 per side. |
Check it back: 45 + 35 + 35 = 115 lb.
This is the same greedy loading the plate calculator uses, except that page also knows which plates you actually own and will tell you when a load is not reachable with them.
Other ways to make 35 lb a side
35 lb per side is the number to hit. The biggest-plate-first answer above keeps the sleeve tidy and uses 1 plate a side. If a size is missing from your stack, these are the rest of the combinations the same total allows:
- 1 × 25 + 1 × 10 per side — 2 plates
- 1 × 15 + 2 × 10 per side — 3 plates
- 2 × 15 + 1 × 5 per side — 3 plates
Halves matter: a 2.5 lb plate per side is 5 lb on the bar, which is the smallest jump most home gyms can make. Fractional plates exist for exactly this, and they are the cheapest addition to a stack — see the plate buying guide.
Warm-up ramp to 115 lb
Each step is a weight you can actually load: the percentages are rounded to the nearest 5 lb increment, and steps that would sit on top of each other are dropped. Reps are the ladder the warm-up calculator builds.
| Set | Pounds | Reps | Per side |
|---|---|---|---|
| Empty bar | 45 lb | 10 | empty bar |
| 60% of top set | 70 lb | 5 | 1 × 10 + 1 × 2.5 |
| 80% of top set | 90 lb | 3 | 1 × 15 + 1 × 5 + 1 × 2.5 |
| Working set | 115 lb | — | 1 × 35 |
Set your own top set, bar weight and rep targets in the warm-up calculator, which also handles a bar that is not 45 lb.
115 lb in kg
115 lb is 52.16 kg on the nose, and kg plates come in fixed sizes, so what goes on the bar is the nearest weight you can actually build — which is exactly what the kg/lb converter returns.
| Kg total | Per side | Against 115 lb |
|---|---|---|
| 52.5 kg | 1 × 15 + 1 × 1.25 | the closest you can load |
| 50 kg | 1 × 15 | 2.16 kg below the exact conversion |
This is the trap when a programme switches units mid-block. The barbell weight guide explains why the nearest loadable weight is often not the nearest number, and the loading chart shows both ladders side by side.
What lifters mean by 115 lb
115 lb is 20 lb short of 2 full-size plates per side (225 lb), so it takes smaller plates rather than a fraction of a big one. People count plates rather than kilos because the bar is loaded symmetrically: naming one side describes both. The convention breaks across units — a 45 lb plate gym and a 45 kg plate gym are doing different maths, which is why the plate-milestone page and the full loading chart exist.
If 115 lb is a working weight rather than a one-rep max, the 1RM calculator works the other way round: from a set you completed to the max it implies, and the percentage chart turns that max back into training loads.
Questions about loading 115 lb
How many plates is 115 lb?
115 lb is 1 × 35 per side on a 45 lb bar: 45 + 35 + 35 = 115 lb.
Is 115 lb the weight including the bar?
Yes. Every barbell total quoted in gyms includes the bar. For 115 lb that leaves 70 lb of plates, so (115 − 45) ÷ 2 = 35 lb per side.
What if my bar is not 45 lb?
Same maths, different bar weight: (115 − 35) ÷ 2 = 40 lb per side on a 35 lb bar (common on deadlift and training bars). Set the bar you actually have in the plate calculator and it loads the rest.
What is 115 lb in kg?
115 lb is 52.2 kg exactly. The nearest weights you can actually load in kg are 52.5 kg (1 × 15 + 1 × 1.25 per side) and 50 kg (1 × 15 per side).
Can I load 115 lb without 45s?
Yes. 1 × 25 + 1 × 10 per side; 1 × 15 + 2 × 10 per side also makes 35 lb a side.
What to buy to load this
The loading above assumes a full gym set already exists. Building one, three purchases decide which weights you can reach - the bar, the plates, and the small pairs that make the in-between numbers lift-able. Each link opens an Amazon search, where prices and stock change hourly.
- Olympic plate set in pounds — the 45 lb pairs that carry this weight and everything heavier.
- Fractional plate pair — 2.5 lb a side turns 5 lb jumps into 2.5 lb ones.
- 45 lb Olympic barbell — the bar every number on this page assumes.
What to buy first, and for how much, is a different question: the home gym builder sizes a whole stack against a budget and a floor area, and the plate, barbell and rack guides say what to check before paying.
As an Amazon Associate, IronMath earns from qualifying purchases. Amazon links on this page are advertising links; we may earn a commission, at no extra cost to you. Recommendations are independent of that.